Details

Standalone Rear Roof Shelf to suit Nissan Patrol Y62

Its an unwritten rule: the more you go camping, the more stuff you seem to acquire. We get it, the gadgets and toys are half the fun, but when space is tight its tricky to find the room to pack anything other than the essentials. Our Standalone Rear Roof Shelf helps you get organised, with a secure place to store smaller, lightweight items that so often end up chaotically floating around the back of the car. So you can pack more of the creature comforts you love, without worrying about where on earth youre going to put them. 

FEATURES:

• Less packing headaches make clever use of your vehicle's most underutilised space: its vertical height. 
• A real workhorse the standalone shelf holds a surprising amount of gear.
• Hidden out of the way slimline design for storage of lightweight items without compromising visibility out the rear window. 
• Easy, fuss-free DIY install installation is simple, taking approximately 30 minutes, and is totally reversible, with no driling.
• Customisable foundation simplifies mounting accessories, with M5 mounting holes and cutouts to suit MOLLE storage system products. 
• Two bottle openers so youve always got one right next to your fridge setup.
• Made to last  precision laser cut and pressed steel, powder coated in a textured matt black finish that is hard-wearing and looks great. 
• Extra support side Panels provide additional support for the shelf, and can be used for mounting additional accessories like torches and extinguishers. 

INCLUDES:

To suit the Nissan Patrol Y62 (All Models):

• 1 x Standalone Rear Roof Shelf 
• 2 x Side Molle Support Panels (1 Pair) Choose your preference for Small or Large Panels above
• All hardware required to install are included

Australian Designed, Made & Owned.

Passengers should not ride in the third-row with the shelf installed. For full dimensions, load ratings, and other important details for this product, please refer to the Product FAQ tab.

What is the load/weight capacity for the Standalone Shelf?

The shelf is rated to 10kg, evenly distributed across the shelf. We recommend it as storage for lightweight and soft cargo. If you need help imagining what that looks like, here's an example:

Can we still use the third-row seats with the Shelf installed?

Any modifications to your vehicles third-row area may impact its compliance with safety regulations. We do not recommend carrying passengers in this space after modifications as it presents a dangerous safety hazard.
 
Additionally, some modifications that affect passenger capacity may require certification (mod-plating) to ensure your vehicle remains compliant with your state or territorys regulations. We recommend checking with your local transport authority for specific requirements.

Is the Standalone Shelf compatible with the KAON Light Cargo Barrier?

Yes. The newest models of Standalone Shelf (KS0645) and Light Cargo Barrier (KS0644) are compatible. Instructions for installing them together are provided. 

For products pre-June 2023:

Pre-June 2023 Light Cargo Barrier (KS0034) + Current Standalone Shelf (KS0645) = layer the Cargo Barrier handle brackets over the Shelf handle brackets. The rear fence on the shelf will need to be removed. 

Pre-June 2023 Standalone Shelf (KS0302) + New Light Cargo Barrier (KS0644) = layer the Cargo Barrier handle brackets over the Shelf handle brackets. The rear fence on the shelf will need to be removed. 

Is the Standalone Shelf compatible with other models of Cargo Barrier?

The Standalone Rear Roof Shelf may not fit if you already have a cargo barrier installed in your vehicle.

From the centre of the handle to the shelf fence (back of shelf / most forward point in car) is 300mm.  

How big is the Standalone Shelf?

The shelf measures 1180 x 475mm. 

What are the clearances when installed?

Clearances when installed (subject to variances of up to +/-5mm): 

Roof to shelf base: 
175mm

Shelf base to floor: 
760mm 

Why does the Y62 Standalone Shelf include an additional Small Side Molle Panel, unlike other KAON Standalone Shelves?

The grab handles in many vehicles, particularly older models, are mounted to captive nuts in the vehicle's frame. The Y62 mounts use a unique system, where the handles are fixed to a bracket that is then welded to the frame up in the roof. These Side Panels provide support and additional peace of mind to suit the unconventional nature of the Y62 mounting system. 

How do the Side Molle Panels work with the curtain airbags?

Both the Small and Large Side Molle Panels are designed to allow unobstructed deployment of the factory curtain airbags. That said, we do not recommend any passengers ride in the third-row seats with either of these products installed. 

What is required to mount the Side Molle Panels?

Both the Small and Large Side Molle Panels for the Y62 mount to the third-row grab handles, as well as being secured within the third-row cup holders. The best thing to do if you are unsure is to watch the video or read the fitting instructions; both are available on the product listing.

Do the Side Molle Panels work with rear drawer systems?

Yes, it should work with most systems, provided you retain access and clearance to the third-row cup holders.