Details

Exterior Rear Molle Panels to suit Toyota Prado 150

Built for the bold and engineered for adventure, the Exterior Rear Molle Panels for the Toyota Prado 150 redefine how you carry essential gear.

Forget cluttered interiors; these sleek yet robust panels offer a secure and accessible exterior storage solution. Perfect for stowing wet or dirty items like recovery gear, shovels, and tools – they keep your cabin clean while ensuring vital equipment is always within easy reach.

Features:

• Sleek yet functional – the panel profiles match the vehicle lines for a stealthy-looking exterior cargo storage solution. 
• Provides accessible exterior storage – perfect for high use wet or dirty gear, such as water, recovery gear, shovels and tools. 
• Secure dual attachment – load bearing mounts secure to your roof rack, while outdoor-rated and tested alloy suction cups secure to your window to retain the panel.
• Ready-to-go with market-leading accessories – including VAAST, STOW iT, QuickFist, Maxtrax Mini and MOLLE / PALS.
• Customisable foundation – a variety of mounting holes and slots allow you to tailor it to your unique needs. 
• Precision laser cut and pressed aluminium, powder coated in a textured matt black finish that is both hard-wearing and looks great. 

Roof Rack Compatibility:

A roof rack is required for install. 

Your rack must be 1240mm wide or less, with a backbone-style mount.

Select ARB BASE Rack for 1240mm wide or less BASE Racks. 

Select the Channel Platform Rack option for the following compatible racks:

• Rhino-Rack Pioneer Platform Series 4,5,6 with Backbone Mounts
• Rola Titan 2 & 3 with Ridge Mounts
• Yakima LockNLoad with Ruggedline Mounts

Includes:

Select your preferred configuration and roof rack option:

• Exterior Rear Molle Panel/s to suit Toyota Prado 150 – Select a Side or Pair
• All hardware, bolts, nut blocks and retainers required to install are included

Please note any accessories shown are optional and not included.

Australian Designed, Made & Owned. 

What is the load limit and how does it affect my roof rack loading?

The maximum load each panel can safely carry is 20kg. Ensure that the mounted accessories do not exceed this limit. We recommend mounting Items heavier than 20kgs directly to the roof rack or inside the vehicle. 

As the Exterior Molles are mounted directly to the roof rack, the Panels themselves (4kg per side) and any accessories mounted to them (up to 20kg per side) will contribute to the overall loading of your roof rack.

It is therefore important to consider the load rating of your rack and ensure that the combined weight of all accessories and the panels do not exceed it.

What can I mount to the Exterior Molle Panels?

The Exterior Molle Panel was designed with a mesh configuration to suit a number of common camping and touring accessories. Indicated below are examples of accessories suitable for the panel and where you may want to position them on the panel. This is intended as a guide only, as the accessories you can mount and their location on the panel are not limited to what is displayed here. We recommend determining the configuration that works best for your set-up and the gear you would like to mount.

We do not recommend mounting dangerous goods such as petrol to the Exterior Molle Panels. Although you may be able to legally mount fuel or other dangerous goods on the Exterior Molle Panels under your local jurisdiction, we advise against using them for this purpose. 

What are the legal requirements for using the Exterior Molle Panels?

Under the Load Restraint Guide for Light Vehicles (2018) by the Australian National Transport Comission, projections must not exceed 150mm from the outermost part of the vehicle on either side. Additionally, the total width of the vehicle and protrusions must not exceed 2500mm. Demonstrated below is how to measure the distance from the outermost point on the vehicle. In this example, any accessories mounted on the exterior molle panels must not exceed beyond the blue line. 

Can the Molle Panels be mounted with an awning?

Yes, the Exterior Molle can be mounted with an awning. It simply requires a few additional steps. 

Prior to installing the Exterior Molle you will need to ensure your awning brackets are clear of the mounting space. You will then need to determine whether there is enough space between the awning and rack/vehicle for you to simply feed through the molle’s upper mount bracket to attach the panel, or whether you will need to remove awning entirely. These adjustments will need to be made prior to starting this installation.