Details

A set of four (4) rollers to aid when installing or removing your TENT031 or other cumbersome items on/off your roof rack.

Bolt two (2) rollers on the last slat of your rack. The combined slat for a Slimline II Kit or the last slat on a Slimsport Kit.

The other two (2) rollers bolt towards the front of your rack. Place the rollers one (1) slat behind the installed TBMK020* sold separately.

The rollers have an adjustable height of 53mm/2.1'' - 80mm/3.2'' from the top of the slat.

When using the TBMK020, these rollers can accommodate tent tracks that are either flush with the base of the tent or up to 27mm high through their built in height adjustment.

The rollers are unobtrusive and can be left on the rack with your TENT031.

Made of high strength steel and finished in the same durable black powder-coating as the Front Runner racks.

Each roller has a HDPE outer sleave to prevent damage to high-value items.

The rollers can carry a load of 140kg/308lbs over all four (4) rollers.

Note: The Roller System will roll against your Roof Top Tent base. If you own a tent other Front Runner's TENT031, ensure that it has a hard base that would support its weight on the roller.